Collection: Modern Floor Register

Floor Registers - Modern Vent Covers

Floor registers control conditioned airflow from your HVAC ductwork directly through the floor surface, shaping comfort in every room. Green Vent offers aluminum and steel floor registers engineered for modern residential spaces combining rust-resistant materials with clean, minimalist design that coordinates with hardwood, tile, and luxury vinyl plank floors. The right type depends on your duct's function (supply or return), your material preference, and your room's traffic level.

Understanding the basics of how floor registers work makes selecting the right type straightforward.

What Are Floor Registers?

Floor registers are vent covers installed in flooring that distribute heated or cooled air from a forced-air HVAC system into a room. They sit over a duct opening cut into the floor, allowing conditioned air to pass from the ductwork into the living space through the floor vent cover. Floor registers serve two roles: supply (delivering air into the room) and return (drawing air back to the HVAC system). Supply registers include an adjustable damper to control how much air enters the room.

Green Vent offers three distinct floor register types to match different HVAC roles and room environments.

Types of Floor Registers

Each Green Vent floor register is designed around a specific function and installation environment. Here are the three options in the collection.

Aluminum Floor Register

The Aluminum Floor Register is Green Vent's adjustable supply register, built with T-blade louvers and a built-in Open/Back Damper (OBD) for direct airflow control. The T-blade face directs conditioned air from the duct opening into the room, while the OBD lets you open, restrict, or fully close airflow per room. Aluminum construction offers inherent rust resistance a practical advantage near kitchens, basements, and entryways where humidity variation is common. Installation requires only basic hand tools.

• Adjustable T-blade damper for room-by-room airflow control
• Rust-resistant aluminum alloy no corrosion or warping over time
• Available in White and Matte Gray | Duct opening size: 4×10 in.

Aluminum Floor Return Grille

The Aluminum Floor Return Grille is a fixed-louver, non-dampered vent cover engineered for return air  drawing spent air back to the HVAC system rather than delivering it. The smooth fixed louver design allows maximum unobstructed airflow back to the system, and an integrated washable filter captures dust and particulates at floor level. Return grilles have no damper by design they must remain fully open to maintain proper HVAC system pressure. Available in White and Matte Gray at the standard 4×10-inch duct opening.

• Fixed smooth louver with integrated washable filter captures floor-level dust
• No damper (required for return air function must stay open)
• Available in White and Matte Gray | Duct opening size: 4×10 in.

Steel 2-Way Floor Register

The Steel 2-Way Floor Register is Green Vent's heavy-duty option, engineered specifically for high-traffic residential floors where walkability and structural strength are the primary requirements. Its heavy-gauge steel construction handles continuous foot traffic without bending or creaking. A 2-way airflow design distributes air in two directions, and an integrated mesh trap beneath the grille face catches debris before it enters the ductwork. Available in Matte Black and Brown, it coordinates naturally with dark hardwood and warm-toned flooring in both single units and a convenient 2-pack.

• Heavy-duty walkable steel built for high-traffic hallways, entryways, and living areas
• Integrated mesh trap prevents debris from entering ductwork
• Available in Matte Black and Brown | Duct opening size: 10×4 in. | Single & 2-Pack

Knowing the type you need is step one choosing the right material and size is step two.

How to Choose the Right Floor Register

Three practical criteria guide every floor register purchase: function, material, and size. Work through each one before selecting.

Match the Function: Supply or Return?

Choose a floor register with an adjustable damper (OBD) for supply air ducts; choose a fixed-louver floor return grille with no damper for return air ducts. Supply registers deliver conditioned air and require a damper for flow control use Green Vent's Aluminum Floor Register. Return grilles must stay fully open to maintain proper HVAC system pressure use Green Vent's Aluminum Floor Return Grille. Identify the duct role by airflow direction: air blowing out means supply; air drawing in means return.

Match the Material: Aluminum or Steel?

Aluminum is the preferred material for most modern residential installations it is rust-resistant, lightweight, and aesthetically neutral; steel is the correct choice when floor traffic volume demands maximum structural strength. Aluminum alloy is inherently corrosion-free, requiring no protective coating, making it well-suited for humidity-adjacent areas like kitchens, laundry rooms, and basements. Steel registers are powder-coated for resistance and built with a heavier gauge that withstands high-footfall zones such as hallways and entryways.

Get the Size Right: Measure the Duct Opening

Always measure the duct opening the inner hole in your floor not the existing register face; the listed size on every Green Vent floor register refers to the duct opening dimension, not the outer grille. All three Green Vent floor register types fit the standard 4×10-inch duct opening, and the outer grille face is intentionally slightly larger to overlap the opening edges. Note that "4×10" and "10×4" describe the same opening the difference is orientation labeling only.

Green Vent's floor register collection is built around these exact criteria premium aluminum for corrosion resistance, steel for durability, and a consistent 4×10 sizing standard for universal fit.

Why Choose Green Vent Floor Registers?

Green Vent floor registers are engineered from premium aluminum alloy and heavy-duty steel to replace outdated, corrosion-prone vent covers with a product that performs and looks better from day one. Aluminum alloy is naturally corrosion-free no peeling paint, no rust blemishes transferring to your flooring over time. The clean minimalist design in White, Matte Gray, Matte Black, and Brown integrates seamlessly with modern hardwood, tile, and luxury vinyl plank floors. Every register is lightweight, DIY-friendly, and sized to the standard 4×10-inch duct opening no professional installer required.

• Rust-proof aluminum alloy: no coatings to chip or corrode, even in humid rooms
• Modern minimalist design: four finish options coordinate with contemporary residential flooring
• DIY-ready construction: lightweight build installs with basic hand tools, no contractor needed
• Steel mesh trap option: the Steel 2-Way Register captures debris and pet hair before it reaches the ductwork

Frequently Asked Questions

What is the difference between a floor register and a floor return grille?

A floor register delivers conditioned air into a room through a damper-equipped supply duct; a floor return grille draws room air back into the HVAC system through a fixed-louver, filter-equipped opening with no damper. The functional distinction determines which product belongs at each duct location using a supply register over a return duct (or vice versa) will reduce HVAC efficiency. Select the Aluminum Floor Register for supply ducts and the Aluminum Floor Return Grille for return ducts.

Do floor registers work for both heating and cooling systems?

Yes - floor registers work in both heating and cooling forced-air HVAC systems. Heat rises naturally from floor-level registers, which makes floor placement particularly effective for heating applications. Cooling from floor level also works effectively, though ceiling registers can distribute cool air more evenly in homes that run air conditioning as the primary system.

Can I install a Green Vent floor register myself?

Yes - all Green Vent floor registers are engineered for DIY installation and require only basic hand tools. Installation involves removing the old register, cleaning the duct lip, and setting the new register over the standard 4×10-inch duct opening. No cutting, adhesives, or specialized equipment are needed.

How do I clean my floor register?

Floor registers should be vacuumed monthly and removed for a full clean quarterly using mild dish soap and a soft brush. Green Vent's aluminum construction does not corrode when exposed to water or standard cleaning agents, making maintenance straightforward and low-effort. Dry the register fully before reinstalling it over the duct opening.